The individual operative conference system is designed for communication of the personnel from operations departments in the non-calling direct conferencing mode with a large number of subscribers using a headset.

• The number of network subscribers - 15, suitable for increasing to 30;
• The operation mode is “All on-line”, all parties can hear each other;
• Terminal subscriber devices in the form of desktop consoles with volume control buttons and two microphone enabling buttons. One is with fixing, the other - without fixing.
• The power-on indicator of the microphone;
• The headset with one earphone and an adjustable microphone;
• The capability to operate via wire communication channels, up to 100 m;
• 24 VDC system power supply.

• Distribution Unit BR-1605 - 1-2 pcs *
• Subscriber device - up to 30 pcs *
• Headset «Plantronics» HW251N - up to 30 pcs* *

* - quantity depending on the order

** - depends on the number of subscriber devices ordered.

The system is designed for qualitative improvement of communication conditions with increased noise level.

The system is wired and based on individual headsets with increased noise protection and microphones with noise compensation, with individual adjustment on the user’s head.

The system is mobile and is supplied in 2 cases.

• Fast deployment and expansion by connecting additional headsets;
• The operation mode is “All on-line”, all parties can hear each other;
• Adjusting volume and opening of the noise barrier;
• Three modes of microphone enabling: permanent; auto; manual, a push-to-talk switch;
• Internal noise discrimination and bandwidth equalization;
• High reliability and easy operation.

Case No. 1

• Central unit.

Case No. 2

• Individual headsets;
• Extension cables.

Conference System KS-100M is a mobile set of KS-100, which ensures quick deployment of studio equipment at places of emergency intercom calls, conference, conferences and other audio events.

The set includes 14 consoles to organize the workplaces of the conference parties, including up to three chairman consoles with the function of blocking the microphones of all the parties' consoles. The specific set components should be specified when ordering.

• Insonation of a separate zone of listeners with the help of two active speaker systems;
• Operation in the communication channel with remote subscribers via the E1 and VF channels;
• 220V power supply
• Emergency power supply = 48V;
• Quick on-site installation using Cat. 5 UTP cable included.

• Central Unit BC-2108,
• Console PKS-100,
• Conference parties’ consoles,
• Active Speaker System AS-1,
• A case 

Set is supplied in two cases, provided with fixing elements, which ensure convenient transportation, preservation of performance capabilities and appearance of equipment.

Subscriber extension unit is designed to increase the number of desks connected to one unit БЦ-2108 of the system Round Table КС-100. It is used if necessary to increase the number of participants more than 30. It is connected in series with the main line of desks in any place. It is possible to mount the BRА-2108 on any horizontal or vertical surface in any position.

The control panel ПКС-100 is designed for the operational management of the meeting operation modes and switching on / off microphones of the participants of the conference system KC-100. It can be placed both near the unit БЦ-2018 and in any other place of the line for control panels connection.

The interface unit БИ-2108 is designed to interface the conference system KС-100 with a personal computer through a local computer network.

Under the control of the installed specialized PC software "Program complex for control of equipment KC-100" included in the complete set.

The interface unit БИ-2108 is used for units with the manufacturing date from August 2018.

The interface unit in online mode provides:

• gain control for all channels (INPUT, CONTROL PANEL, PM RECEIVING);
• volume control from the PM channel and the volume of the sound;
• connection / disconnection of the PM channel;
• indication of the signal levels from the control panel / input and the signal level from the PM channel;
• switching of operation modes of the equipment KC-100;
• on / off of participant and chairman control panels with the indication of their states.

The software "Program complex for control of equipment KC-100" using the interface unit BI-2108 provides:

• control and management of the conference system KC-100 in online mode;
• ability to work with several systems KC-100 located in different places;
• setting the parameters of the interface unit BI-2108 for the network parameters (IP address, mask, gateway, port);
• saving of equipment location parameters;
• indication of the connection with the interface unit BI-2108;
• automatic diagnostics at connection to the system KC-100 (Presence and state of the control panels, operation modes, level settings) by comparing with the previously set reference value;
• notification of the operator about the results of diagnostics;
• searching of any connected devices in the local network.

The camera point unit BNK-2018 is designed for automatic camera pointing at a conference speaking participant on the basis of the microphone activity of the control panel with the presetting mode in specific operating conditions.

• Manual camera pointing at system setting
• Storing of customized positions
• Binding of the position to a certain control panel of the participant of the conference system
• Automatic camera pointing to a previously set position at switching on the microphone of the control panel.
• Automatic return to the starting position after switching off all microphones
• Automatic switching of video signal from several cameras (at installed video switcher)
• Connection to the system in line break of control panels.

The system is designed for remote testing of studios equipped on the basis of the conference systems KC-100 for the purpose of readiness assessment for holding teleconferences at limited access to the premises, a small number of service staff on the site and also for remote correction of equipment parameters in the studio.

The system provides control and management of functions of the conference systems KC-100 installed in studios via IP channel from a single center.

For testing of any transmitting and receiving audio signals it is used the whole complex of equipment for arrangement of the intercom communication with the transmission of a test sinusoidal signal in the studio via the receiving channel, its reproduction through individual desks and speaker acoustic systems, and signal acknowledgement through the switched on microphone of each desk, and the signal transmission into the central station for measuring and assessment of the sound quality by the speaker.

Testing control is performed from the operator's PC using the software "Program complex for control of equipment KC-100" (Included in the complete set of the interface unit БИ-2108

Conference system KS-100 is designed for engineering support of meetings, conferences, intercom calls of any level, both local and from remote studios via digital and analogue communication channels, providing high reliability and maximum comfort to participants of events.

• Connecting up to 30 individual consoles or active speakers to central unit BC-2108;
• Connecting up to 120 individual consoles or active speakers using expansion units;
• Conducting conferences with insonation at each workplace;
• Connection to the analogue VF channel for operation with remote studios;
• Connection to the E1 stream for operation in the digital communication systems;
• Enabling/disabling management from external console PKS-100;
• Connecting external devices for additional sound processing (acoustic feedback eliminator, compressor, equalizer);
• Connecting an additional wireless microphone;
• Connecting to the external audio and recording system.
• Operation modes:
• “SPEECH"” - enabling one microphone is possible;
• “DISCUSSION” - enabling five microphones is possible;
• “DIALOG” - the next microphone turns off the previous one.
• “ON REQUEST” - asking to speak.

• Central Unit BC-2108,
• Chairman consoles,
• Console PKS-100,
• The parties’ consoles,
• Active Speaker Systems AS-1,

• Subscriber extension unit БРА-2108,

• Interface unit БИ-2108,

•  

  Сamera point unit BHK-2108.

Conference System KS-50 “Round table” is designed to equip large studios with 8 to 60 speaking parties.

SYSTEM BASIC CHARACTERISTICS

• Comfortable sound for each conference party.
• Operation modes:

         -“SPEECH”;

         -“DISCUSSION”;

         -“CONFERENCE CALL”.

• Duplex conference call;
• Easy system expansion;
• Compact modular design;
• Connecting up to 60 parties’ consoles;
• Connecting up to six additional microphones;
• Connecting an additional signal source via a line input;
• Front-panel output level indication;
• Galvanic isolation and current protection of four-wire VF channels and physical lines;
• Standard output to sound recording equipment (JACK);
• Connecting additional speakers with a total resistance of 500 Ohm to 100 V;
• Simultaneous enabling of up to 5 individual console microphones in the “DISCUSSION” mode;
• Compatibility in levels with existing intercom systems, sound systems, sound recording equipment.

CONSOLE BASIC CHARACTERISTICS

• An electret microphone with a built-in power-on indicator;
• A built-in speaker;
• Two control buttons;
• Impact-resistant plastic housing;
• Original design;
• Speech perception using a microphone and signal transmission for amplification and switching to control unit BU-5060;
• Voice signal reproduction;
• Enabling/disabling the microphone of your console using “MICROPHONE” button;
• Blocking of all parties’ microphones using the button “MANAGEMENT” on the chairman console;
• Indication of the microphone's “on” state;
• Disabling the console loudspeaker, when the microphone is enabled;
• The capability of changing the position of the microphone relative to the user, taking into account their individual needs, without moving the console base.

• Control Unit BU-5060,
• The chairman console (1 to 3 pcs.): PM-50P
• Parties’ consoles (15 to 60 pcs.): PM 50
• Microphone for the platform (options)
• Pedal switch (options)
• Amplifier 35 to 120 W (options)
• Speaker system 20 W (options)
• Wireless microphone (options)